An energy efficiency assessment of Yttrium-aluminum-garnet laser in vitro.

To study the effect range of the Nd:YAG laser through various levels of cloudy medium for targets with varying grayscale values in vitro. The coated paper cards with grayscale values of 0, 50, 100, and 150 were used as the laser's targets, which were struck straightly with varying energies using three burst modes (single pulse, double pulse, and triple pulse). Six filters (transmittances of 40, 50, 60, 70, 80, and 90) were applied to simulate various levels of cloudy refractive medium. Image J software was used to measure the diameters and regions of the laser spots. The ranges of the Nd:YAG laser spots increased with energy in the same burst mode (P < 0.05). Under the same amount of energy, the ranges of the Nd:YAG laser spot increased with the grayscale value of the targets (P < 0.05). The greater the transmittance of the filters employed, the larger the range of the Nd: YAG laser spots produced. Assuming that the total pulse energy is identical, the effect ranges of multi-pulse burst modes were significantly larger than those of single-pulse burst mode (P < 0.05). The effect range of a Nd:YAG laser grows with increasing energy and the target's grayscale value. A cloudy refractive medium has a negative impact on the effect range of the Nd: YAG laser. The single pulse mode has the narrowest and safest efficiency range.

[Determination of 24 elements migration in Yixing clay pottery by inductively coupled plasma mass spectrometry].

OBJECTIVE: To establish an analytical method for determining the migration of 24 elements in Yixing clay pottery in 4% acetic acid simulated solution by inductively coupled plasma mass spectrometry. METHODS: Four types of Yixing clay pottery, including Yixing clay teapot, Yixing clay kettle, Yixing clay pot, and Yixing clay electric stew pot, were immersed in 4% acetic acid as a food simulant for testing. The migration amount of 24 elements in the migration solution was determined using inductively coupled plasma mass spectrometry. RESULTS: Lithium, magnesium, aluminum, iron, and barium elements with a mass concentration of 1000 µg/L; Lead, cadmium, total arsenic, chromium, nickel, copper, vanadium, manganese, antimony, tin, zinc, cobalt, molybdenum, silver, beryllium, thallium, titanium, and strontium elements within 100 µg/L there was a linear relationship within, the r value was between 0.998 739 and 0.999 989. Total mercury at 5.0 µg/L, there was a linear relationship within, the r value of 0.995 056. The detection limit of the elements measured by this method was between 0.5 and 45.0 µg/L, the recovery rate was 80.6%-108.9%, and the relative standard deviation was 1.0%-4.8%(n=6). A total of 32 samples of four types of Yixing clay pottery sold on the market, including teapots, boiling kettles, casseroles, and electric stewing pots, were tested. It was found that the migration of 16 elements, including beryllium, titanium, chromium, nickel, cobalt, zinc, silver, cadmium, antimony, total mercury, thallium, tin, copper, total arsenic, molybdenum, and lead, were lower than the quantitative limit. The element with the highest migration volume teapot was aluminum, magnesium, and barium; The kettle was aluminum and magnesium; Casserole was aluminum, magnesium, and lithium; The electric stew pot was aluminum. CONCLUSION: This method is easy to operate and has high accuracy, providing an effective and feasible detection method for the determination and evaluation of element migration in Yixing clay pottery.

Treatment of tomato paste wastewater by electrochemical and membrane processes: process optimization and cost calculation.

This study investigated the treatment of wastewater from tomato paste (TP) production using electrocoagulation (EC) and electrooxidation (EO). The effectiveness of water recovery from the pretreated water was then investigated using the membrane process. For this purpose, the effects of independent control variables, including electrode type (aluminum, iron, graphite, and stainless steel), current density (25-75 A/m2), and electrolysis time (15-120 min) on chemical oxygen demand (COD) and color removal were investigated. The results showed that 81.0% of COD and 100% of the color removal were achieved by EC at a current density of 75 A/m2, a pH of 6.84 and a reaction time of 120 min aluminum electrodes. In comparison, EO with graphite electrodes achieved 55.6% of COD and 100% of the color removal under similar conditions. The operating cost was calculated to be in the range of $0.56-30.62/m3. Overall, the results indicate that EO with graphite electrodes is a promising pretreatment process for the removal of various organics. In the membrane process, NP030, NP010, and NF90 membranes were used at a volume of 250 mL and 5 bar. A significant COD removal rate of 94% was achieved with the membrane. The combination of EC and the membrane process demonstrated the feasibility of water recovery from TP wastewater.

Portable tri-color ratiometric fluorescence paper sensor for intelligent visual detection of dual-antibiotics and aluminium ion.

The toxicological effect between co-existed antibiotics and metal ions was dangerous to the ecological environment and public health. However, the rapid quantification tools with convenience, accuracy and low cost for the detection of multiple targets were still challenging. Herein, a portable tri-color ratiometric fluorescence paper sensor was constructed by coupling of blue carbon dots and fluorescence imprinted polymer for down/up conversion simultaneous detection of tetracycline and sulfamethazine. Interestingly, the cascade detection of aluminum ion was also realized based on the individual detection system of tetracycline without the assistance of complex coupling reagents. The detection limits of smartphone method for the visual detection of tetracycline, sulfamethazine and aluminum ion were calculated as 0.014 µM, 0.004 µM and 0.019 µM, respectively. The portable fluorescence paper sensor was applied for the visual detection of tetracycline, sulfamethazine and aluminum ion in actual samples successfully with satisfactory recoveries. With the advantages of rapidness, low cost, and portability, the developed portable fluorescence paper sensor provided a new strategy for the visual real-time detection of multiple targets.

Identification of MATE Family and Characterization of GmMATE13 and GmMATE75 in Soybean's Response to Aluminum Stress.

The multidrug and toxic compound extrusion (MATE) proteins are coding by a secondary transporter gene family, and have been identified to participate in the modulation of organic acid exudation for aluminum (Al) resistance. The soybean variety Glycine max "Tamba" (TBS) exhibits high Al tolerance. The expression patterns of MATE genes in response to Al stress in TBS and their specific functions in the context of Al stress remain elusive. In this study, 124 MATE genes were identified from the soybean genome. The RNA-Seq results revealed significant upregulation of GmMATE13 and GmMATE75 in TBS upon exposure to high-dose Al3+ treatment and both genes demonstrated sequence homology to citrate transporters of other plants. Subcellular localization showed that both proteins were located in the cell membrane. Transgenic complementation experiments of Arabidopsis mutants, atmate, with GmMATE13 or GmMATE75 genes enhanced the Al tolerance of the plant due to citrate secretion. Taken together, this study identified GmMATE13 and GmMATE75 as citrate transporter genes in TBS, which could improve citrate secretion and enhance Al tolerance. Our findings provide genetic resources for the development of plant varieties that are resistant to Al toxicity.

Genome-Wide Identification, Expression Analysis under Abiotic Stress and Co-Expression Analysis of MATE Gene Family in Torreya grandis.

The multidrug and toxin efflux (MATE) family participates in numerous biological processes and plays important roles in abiotic stress responses. However, information about the MATE family genes in Torreya grandis remains unclear. In this study, our genome-wide investigation identified ninety MATE genes in Torreya grandis, which were divided into five evolutionary clades. TgMATE family members are located on eleven chromosomes, and a total of thirty TgMATEs exist in tandem duplication. The promoter analysis showed that most TgMATEs contain the cis-regulatory elements associated with stress and hormonal responses. In addition, we discovered that most TgMATE genes responded to abiotic stresses (aluminum, drought, high temperatures, and low temperatures). Weighted correlation network analysis showed that 147 candidate transcription factor genes regulated the expression of 14 TgMATE genes, and it was verified through a double-luciferase assay. Overall, our findings offer valuable information for the characterization of the TgMATE gene mechanism in responding to abiotic stress and exhibit promising prospects for the stress tolerance breeding of Torreya grandis.

Comparing Aluminum Concentrations in Adult and Pediatric Parenteral Nutrition Solutions: Multichamber-Bag versus Compounded Parenteral Nutrition.

Aluminum contamination in parenteral nutrition (PN) solutions can lead to neurotoxicity, reduced bone mass, and liver toxicity, especially in pediatric patients. Ingredients commonly used in PN compounding, such as vitamins, trace elements, calcium, and phosphate salts, contain significant amounts of aluminum. This study aimed to compare aluminum concentrations in multichamber-bag (MCB) and compounded PN for adults and pediatrics. A prospective study assessed aluminum concentrations in various types of MCB and compared them with compounded PN formulations with similar compositions. The types of MCB included Lipoflex® (without electrolytes), Omegaflex®, Finomel®, Smofkabiven® (with and without electrolytes), Olimel®, Clinimix®, and Numeta®. Overall, 80 aluminum determinations were included: 36 for MCBs and 44 for compounded PN. MCBs showed significantly lower aluminum concentrations than compounded PN: 11.37 (SD 6.16) vs. 21.45 (8.08) µg/L, respectively. Similar results were observed for adult (n = 40) and pediatric (n = 40) PN formulations (12.97 (7.74) vs. 20.78 (10.28) µg/L, and 9.38 (2.23) vs. 22.01 (5.82) µg/L, respectively). Significant differences were also found between MCBs depending on the manufacturing company. These findings suggest that MCBs PN offer a safer option for reducing aluminum contamination in PN. Harmonizing regulations concerning aluminum concentrations in PN solutions could help mitigate differences between PN formulations.

Degradation of the neonicotinoid pesticide imidacloprid by electrocoagulation and ultrasound.

Imidacloprid is still a widely used neonicotinoid insecticide that is banned in many countries because of the associated environmental risks. Due to the inefficiency of conventional wastewater treatments for pesticide removal, new treatment methods are being investigated. Electrochemical methods, including electrocoagulation (EC), seem to be promising alternatives considering their effectiveness in removing various pollutants from wastewater. The aim of this study was to investigate the effects of electrode material, current density, ultrasound, and operation time on the efficiency of imidacloprid removal from a model solution by EC. The combination of aluminum electrodes and 20 A of applied current for 20 min resulted in total imidacloprid degradation. A simplified energy balance was introduced as a form of process evaluation. Combining ultrasound with EC resulted in 7% to 12% greater efficacy than using only EC.

Comparison of the shear bond strengths of two different polyetheretherketone (PEEK) framework materials and CAD-CAM veneer materials.

BACKGROUND: This study evaluated the shear bond strength (SBS) of two different polyetheretherketone (PEEK) and CAD-CAM materials after aging. METHODS: A total of 42 frameworks were designed and milled from 2 different PEEK discs (Copra Peek, P and BioHPP, B). P and B frameworks were divided into 3 subgroups (n = 7). 14 slices were prepared each from feldspathic ceramic (Vitablocs Mark II, VM), hybrid nanoceramic (Cerasmart, CS), and polymer-infiltrated ceramic (Vita Enamic, VE) blocks. After surface preparations, the slices were cemented to P and B surfaces. The samples were subjected to thermal aging (5000 cycles). SBS of all the samples was measured. Fractured surfaces were examined by SEM/EDX analysis. The Shapiro-Wilk, Two-way Robust ANOVA and Bonferroni correction tests were used to analyze the data (a = .05). RESULTS: Frameworks, ceramics, and frameworks x ceramics had significant differences (p < 0.05). The highest SBS value was seen in B-VM (p < 0.05). VM offered the highest SBS with both P and B. The differences between P-VM, P-CS, P-VE and B-CS and B-VE were insignificant (p > 0.05). According to EDX analysis, ytterbium and fluorine was seen in B content, unlike P. While VM and CS contained fluorine, barium, and aluminum; sodium and aluminum were observed in the VE structure. CONCLUSION: Bonding of P and B with VM offers higher SBS. VM, CS and VE did not make any difference in SBS for P, however VM showed a significant difference for B.

Aberrant occlusal sensitivity in adults with increased somatosensory amplification: a case-control study.

OBJECTIVES: Occlusal sensitivity (OS)-the ability to detect fine objects between opposing teeth-mainly relies on the activity of mechanoreceptors located in the periodontal ligament. We tested whether somatosensory amplification (SSA)-the tendency to perceive normal somatic sensations as being intense, noxious, and disturbing, which plays a critical role in hypervigilance-affects OS. MATERIALS AND METHODS: We measured OS in 66 adults divided into three groups based on their SSA scores (LowSSA, Intermediate - IntSSA, HighSSA) by asking them to bite on aluminum foils (8 to 72 µm thick) and a sham foil, and report whether they felt each foil. We performed 20 trials for each thickness and sham condition (each participant was tested 120 times), and compared the frequency of correct answers (%correct) among groups after adjusting for participants' trait anxiety, depression, self-reported oral behaviors, and masseter cross-sectional area. RESULTS: %correct was affected by the interaction Foil Thickness-by-SSA (p = 0.007). When tested with the 8 µm foil, the HighSSA group had a lower %correct than the IntSSA (contrast estimate [95% CI]: -14.2 [-25.8 - -2.6]; p = 0.012) and the LowSSA groups (-19.1 [-31.5 - -6.6]; p = 0.001). Similarly, with the 24 µm foil, the HighSSA group had a lower %correct compared to the IntSSA (-12.4 [-24.8-0.1]; p = 0.048) and the LowSSA groups (-10.8 [-22.5-0.8]; p = 0.073). CONCLUSION: Individuals with high SSA present with an aberrant occlusal sensitivity. CLINICAL RELEVANCE: Our findings provide novel insights into the relationship between occlusal perception and psychological factors, which may influence an individual's ability to adapt to dental work.

Analyzing global research trends and focal points in the utilization of laser techniques for the treatment of urolithiasis from 1978 to 2022: visualization and bibliometric analysis.

Laser lithotripsy is gaining global prominence and is a dynamically progressing field marked by a continual influx of new and comprehensive research each year. Recently, there has been a noticeable shift toward the adoption of various kinds of lasers, such as holmium: yttrium-aluminum-garnet (Ho:YAG) and thulium fiber (TFL) lasers. Consequently, we aim to conduct a bibliometric analysis to analyze key areas of research activity within scientific publications that center on the utilization of laser techniques in urolithiasis. A search of the literature spanning from 1978 to 2022 was carried out on 25 December 2023 using the Scopus database to explore research related to the application of laser techniques for urolithiasis treatment. Visualization analysis was performed using VOSviewer software (version 1.6.20). We examined 962 publications that met the specified criteria, 791 (82.22%) of which were original articles. The analysis of the retrieved publications indicated a consistent increase in research output from 1978 to 2022; a particularly noteworthy surge occurred after 2003. In particular, the U.S. claimed the leading position as the most productive country, contributing 211 articles (21.93%). However, India had the highest research productivity according to the adjustment index of 19.08. In the European region, 324 publications (33.68% of the total) originated from 25 countries. The Journal of Endourology contributed the most between 1978 and 2022 (n = 96, 9.98%). The most cited paper examined the effectiveness of holmium: yttrium-aluminum-garnet (Ho:YAG) lasers, while a subsequent study focused on the use of a thulium fiber laser (TFL), an emerging laser technology that has gained increased recognition. Co-occurrence analysis revealed three distinct clusters focusing on the types of laser technology, minimally invasive approaches, and success rate/postoperative complications. This comprehensive investigation delves into the global landscape of laser use for the treatment of urolithiasis. This review supports the emerging clinical concept of using various types of laser technology for urolithiasis treatment. Moreover, the hot issues that researchers should focus on based on the findings of this study are the use of different types of laser lithotripsy in view of the surgical approach, success rate and complications.

[Treatment of early capsular blockage syndrome with Nd:YAG laser anterior capsulotomy containing neodymium-doped yttrium aluminum garnet in a case].

A 62-year-old female patient presented with no improvement in vision 10 days after undergoing cataract extraction in the right eye. The unaided visual acuity in the right eye was 0.1, and examination with a slit lamp revealed the presence of the intraocular lens with an increased gap between the intraocular lens and the posterior capsule. Anterior segment optical coherence tomography showed a distance of 3.236 mm between the posterior capsule and the posterior surface of the intraocular lens. Based on the medical history, ocular examination, and auxiliary examinations, a diagnosis of right eye capsular blockage syndrome was made. Nd:YAG laser capsulotomy was performed at the anterior capsule outside the optical zone of the intraocular lens. One week later, the posterior capsule adhered to the posterior surface of the intraocular lens, and there was a significant improvement in vision compared to before the procedure.

Effects of acid and aluminum stress on seed germination and physiological characteristics of seedling growth in Sophora davidii.

Sophora davidii, a vital forage species, predominantly thrives in the subtropical karst mountains of Southwest China. Its resilience to poor soil conditions and arid environments renders it an ideal pioneer species for ecological restoration in these regions. This study investigates the influence of acidic, aluminum-rich local soil on the germination and seedling growth physiology of S. davidii. Experiments were conducted under varying degrees of acidity and aluminum stress, employing three pH levels (3.5 to 5.5) and four aluminum concentrations (0.5 to 2.0 mmol·L-1). The results showed that germination rate, germination index, and vigor index of S. davidii seeds were decreased but not significantly under slightly acidic conditions (pH 4.5-5.5), while strong acid (pH = 3.5) significantly inhibited the germination rate, germination index, and vigor index of white spurge seeds compared with the control group. Aluminum stress (≥0.5 mmol·L-1) significantly inhibited the germination rate, germination index, and vigor index of S. davidii seed. Moreover, the seedlings' root systems were sensitive to the changes of aluminum concentration, evident from significant root growth inhibition, characterized by root shortening and color deepening. Notably, under aluminum stress (pH = 4.3), the levels of malondialdehyde and proline in S. davidii escalated with increasing aluminum concentration, while antioxidant enzyme activities demonstrated an initial increase followed by a decline. The study underscores the pivotal role of cellular osmoregulatory substances and protective enzymes in combating aluminum toxicity in S. davidii, a key factor exacerbating growth inhibition in acidic environments. These findings offer preliminary theoretical insights for the practical agricultural utilization of S. davidii in challenging soil conditions.

External aluminium supply regulates photosynthesis and carbon partitioning in the Al-accumulating tropical shrub Melastoma malabathricum.

Aluminium (Al) is toxic to most plants, but recent research has suggested that Al addition may stimulate growth and nutrient uptake in some species capable of accumulating high tissue Al concentrations. The physiological basis of this growth response is unknown, but it may be associated with processes linked to the regulation of carbon assimilation and partitioning by Al supply. To test alternative hypotheses for the physiological mechanism explaining this response, we examined the effects of increasing Al concentrations in the growth medium on tissue nutrient concentrations and carbon assimilation in two populations of the Al-accumulator Melastoma malabathricum. Compared to seedlings grown in a control nutrient solution containing no Al, mean rates of photosynthesis and respiration increased by 46% and 27%, respectively, total non-structural carbohydrate concentrations increased by 45%, and lignin concentration in roots decreased by 26% when seedlings were grown in a nutrient solution containing 2.0 mM Al. The concentrations of P, Ca and Mg in leaves and stems increased by 31%, 22%, and 26%, respectively, in response to an increase in nutrient solution Al concentration from 0 to 2.0 mM. Elemental concentrations in roots increased for P (114%), Mg (61%) and K (5%) in response to this increase in Al concentration in the nutrient solution. Plants derived from an inherently faster-growing population had a greater relative increase in final dry mass, net photosynthetic and respiration rates and total non-structural carbohydrate concentrations in response to higher external Al supply. We conclude that growth stimulation by Al supply is associated with increases in photosynthetic and respiration rates and enhanced production of non-structural carbohydrates that are differentially allocated to roots, as well as stimulation of nutrient uptake. These responses suggest that internal carbon assimilation is up-regulated to provide the necessary resources of non-structural carbohydrates for uptake, transport and storage of Al in Melastoma malabathricum. This physiological mechanism has only been recorded previously in one other plant species, Camellia sinensis, which last shared a common ancestor with M. malabathricum more than 120 million years ago.

Development of a water-soluble fluorescent Al3+ probe based on phenylsulfonyl-2-pyrone in biological systems.

BACKGROUND: Al exists naturally in the environment and is an important component in acidic soils, which harm almost all plants. Furthermore, Al is widely used in food additives, cosmetics, and medicines, resulting in living organisms ingesting traces of Al orally or dermally every day. Accordingly, Al accumulates in the body, which can cause negative bioeffects and diseases, and this concern is gaining increasing attention. Therefore, to detect and track Al in the environment and in living organisms, the development of novel Al-selective probes that are water-soluble and exhibit fluorescence at long wavelengths is necessary. RESULTS: In this study, an Al3+-selective fluorescent probe PSP based on a novel pyrone molecule was synthesized and characterized to detect and track Al in biological systems. PSP exhibited fluorescence enhancement at 580 nm in the presence of Al3+ in aqueous media. Binding analysis using Job's plot and structural analysis using 1H NMR showed that PSP formed a 1:1 complex with Al3+ at the two carbonyl groups of the dimethyl malonate of the pyrone ring. Upon testing in biological systems, PSP showed good cell membrane permeability, detected intracellular Al3+ in human breast cancer cells (MDA-MB-231), and successfully imaged accumulated Al3+ in Microcystis aeruginosa and the larvae of Rheocricotopus species. SIGNIFICANCE: The novel Al3+-selective fluorescent probe PSP is highly effective and is expected to aid in elucidating the role of Al3+ in the environment and living organisms.

Low-Cost Arduino Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) for Sensitive Nucleic Acid Detection.

This work presents a low-cost transcription loop-mediated isothermal amplification (RT-LAMP) instrument for nucleic acid detection, employing an Arduino Nano microcontroller. The cooling system includes customized printed circuit boards (PCBs) that serve as electrical resistors and incorporate fans. An aluminum block is designed to accommodate eight vials. The system also includes two PCB heaters-one for sample heating and the other for vial lid heating to prevent condensation. The color detection system comprises a TCS3200 color 8-sensor array coupled to one side of the aluminum heater body and a white 8-LED array coupled to the other side, controlled by two Multiplexer/Demultiplexer devices. LED light passes through the sample, reaching the color sensor and conveying color information crucial for detection. The top board is maintained at 110 ± 2 °C, while the bottom board is held at 65 ± 0.5 °C throughout the RT-LAMP assay. Validation tests successfully demonstrated the efficacy of the colorimetric RT-LAMP reactions using SARS-CoV-2 RNA amplification as a sample viability test, achieving 100% sensitivity and 97.3% specificity with 66 clinical samples. Our instrument offers a cost-effective (USD 100) solution with automated result interpretation and superior sensitivity compared to visual inspection. While the prototype was tested with SARS-CoV-2 RNA samples, its versatility extends to detecting other pathogens using alternative primers, showcasing its potential for broader applications in biosensing.

Microwave hydrothermal sulfuric acid leaching of spent cathode carbon from aluminum electrolysis for high efficiency removal of insoluble calcium fluoride.

Toxic substances, like fluoride salts present in spent cathode carbon (SCC), have been a great risk to the environment and public health. Our approach involves alkali leaching to eliminate soluble fluoride, followed by microwave hydrothermal acid leaching to efficiently remove insoluble CaF2 from SCC. The optimized conditions, including a temperature of 353 K, a solid-liquid ratio of 1:20, and a 60-minute reaction time, resulted in an impressive 95.6 % removal of fluoride from SCC. Various characterization techniques were employed to analyze the composition, micro-morphology, and elemental content of the materials before and after the leaching process. Furthermore, critical process parameters on the leaching separation of insoluble CaF2 during microwave hydrothermal acid leaching were systematically investigated. The study removal mechanism revealed the transformation of insoluble CaF2 in the process of microwave oxidation insertion-hydrothermal acid leaching for SCC. The kinetic characteristics of the two-stage leaching process of CaF2 at different temperatures were analyzed according to the shrinkage kernel model. The results indicate that the two-stage leaching process of CaF2 is affected by mixing control and by diffusion control, severally. The expansion of the graphite flake layer of SCC through oxidative intercalation was identified as a critical process for the thorough removal of CaF2. Microwave hydrothermal acid leaching demonstrated a 17 % improvement over traditional hydrothermal acid leaching within the same reaction time, showcasing a noteworthy enhancement in fluoride removal. Consequently, the microwave oxidizing intercalation-hydrothermal acid leaching treatment of SCC, as explored in this study, offers an effective approach for achieving deep defluoridation of SCC.

Cone-beam computed tomography (CBCT) dose optimization technique and image quality assessment scoring.

INTRODUCTION: Linear accelerator (LINAC) embedded with kV source-imager system is capable to do image-guided radiotherapy. The only disadvantage of cone-beam computed tomography image acquisition during treatment is the extra radiation dose to the patient. The aim of this study is to optimize the CBCT imaging doses likely to be received by the patient undergoing radiotherapy without affecting image quality. MATERIAL AND METHODS: The imaging dose to the patient was estimated on CTDI phantoms. The effect of additional filters of different materials (copper, brass, aluminum of thickness 0.1 mm each) was evaluated to find the optimized dose imaging technique. For the pelvis, a single imaging protocol available on the machine was used, whereas for the head and neck region, two protocols, high-quality head and standard-dose head were used. The image quality was assessed on CATPHAN-504 phantom using Owl CATPHAN® QA online tool. A new term "Image Assessment score" (IAS) was introduced to evaluate the image quality. RESULT: In the pelvis protocol, CBCT imaging doses with an additional 0.1-mm brass, copper, and aluminum filter were measured to be reduced by 7.1%, 4.7%, and 2.5%, respectively, whereas for high-quality head protocol, the dose reduction was 25.4% (with brass filter), 22% (with copper filter), and 3.1% (with aluminum filter). For the standard-dose head protocol, doses were reduced by 7.5%, 2.8%, and 2.1% with additional 0.1-mm brass copper and aluminum filters, respectively. Acceptable image quality was observed with all the filters. CONCLUSION: Although the reconstructed images were found somewhat noisier, they did not affect the purpose of imaging, that is, treatment position verification. It was observed that these extra filters further reduce the imaging dose without much affecting the image quality.